Tianyi Sensor IOT Technology Co., Ltd
Sales Manager：Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email：info@fengtutec.com
Add：No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
PRODUCT CENTER
-
Meteorological station
-
Hydrological Monitor
-
Water Quality
-
Agricultural Weather Stations
-
Road Weather Station
-
PV Weather Station
-
Environmental monitoring
-
Virus Detection
Recommended articles
- Piezoelectric rain gauge sensor Working Principle and Precipitation Monitoring Application
- Life Detector Device for Emergency Rescue in Complex Debris Environments
- Greenhouse sensor is primarily used for monitoring and controlling humidity in the air
- Water quality monitoring equipment can collect and analyze water data in real time
- Miniature rain gauge can accurately measure rainfall
- Infrared Thermal Imaging Camera Generates Visible Thermal Images Based on Infrared Radiation
Contact us
Ozone sensor
Model：FT-QT4
Brand：tianyi
Ozone sensor is based on electrochemical principle, it can accurately and conveniently measure ambient O3 and detect the presence and concentration of ozone (O3) gas.
Get a Free Quote- Product details
- Related products
- Related articles
1.Ozone sensor technical parameters
Ozone sensor is based on electrochemical principle, it can accurately and conveniently measure ambient O3 and detect the presence and concentration of ozone (O3) gas.
| model | Measurement parameters | Measurement range | Accuracy | Resolution | unit | Operating temperature | Working humidity |
| QT1 | Carbon monoxide | 0-1000PPM | ±2PPM | 1PPM | PPM | -20℃-+50℃ | 10-95%RH without condensation |
| QT1S | 0-20PPM | ≤±5% | 0.01PPM | PPM | -20℃-+50℃ | 10-95%RH without condensation | |
| QT2 | Sulfur dioxide | 0-20PPM | ±1PPM | 0.1PPM | PPM | -20℃-+50℃ | 10-95%RH without condensation |
| QT2S | 0-1PPM | ≤±5% | 0.001ppm | PPM | -20℃-+50℃ | 10-95%RH without condensation | |
| QT3 | Nitrogen dioxide | 0-20PPM | ±1PPM | 0.1PPM | PPM | -20℃-+50℃ | 10-95%RH without condensation |
| QT3S | 0-1PPM | ≤±5% | 0.001ppm | PPM | -20℃-+50℃ | 10-95%RH without condensation | |
| Qt4 | ozone | 0-20PPM | ±1PPM | 0.1PPM | PPM | -20℃-+50℃ | 10-95%RH without condensation |
| QT4S | 0-1PPM | ≤±5% | 0.001ppm | PPM | -20℃-+50℃ | 10-95%RH without condensation | |
| QT5 | Oxygen content | 0~30%VOL | ±3%FS | 0.1%VOL | VOL | -20℃-+50℃ | 5-95%RH No condensation |
| QT6 | Negative oxygen ions | 0~100,000 units/cm³ | ±10% | 10 pieces/cm³ | Units/cm³ | +10℃-+70℃ | 10-70%RH without condensation |
| QT7 | Hydrogen sulfide | 0-100PPM | ±2PPM | 1PPM | PPM | -20℃-+50℃ | 10-95%RH without condensation |
| QT8 | Methane | 0-100%LEL | ≤±3% | 1%LEL | LEL | -20℃-+50℃ | 10-95%RH without condensation |
| QT9 | Tvoc | 0-100PPM | 55±15 nA/ppm | 1PPM | PPM | -20℃-+50℃ | 10-95%RH without condensation |
| QT10 | Ammonia | 0-100PPM | ±4PPM | 1PPM | PPM | -20℃-+50℃ | 10-95%RH without condensation |
| QT11 | Nitrogen monoxide | 0-250PPM | -2~10PPM | 1PPM | PPM | -20℃-+50℃ | 10-95%RH without condensation |
| QT12 | formaldehyde | 0-10PPM | <1PPM | 0.1PPM | PPM | -20℃-+50℃ | 10-95%RH without condensation |
2.Ozone sensor product size diagram
Address:https://www.tianyisensor.com/Gas-Sensors/Ozone-sensor.html
Previous Article ：Nitrogen Dioxide Detector
Next Article：O3 gas sensor
-
07-182025
EL Detector: Application in Quality Inspection of Photovoltaic Modules
In the solar energy industry, the quality of photovoltaic (PV) modules affects their power generation efficiency, and the EL detector is an important tool for inspecting the quality of PV modules.The EL detector works based on the principle of electroluminescence. When a forward voltage is applied t...
-
04-092025
Bridges: Prone to Icing - Understanding the Reasons and Using Icing Sensors
Here's a little bit of knowledge: Bridges actually freeze more easily than road surfaces.Why is that?From the perspective of heat dissipation, the temperature difference between a bridge deck and an ordinary road surface is quite understandable. The road surface is directly built on the ground,...
-
10-172025
Water Quality Monitoring Technology and Product Solutions
Water quality monitoring is a systematic scientific process designed to assess water conditions, warn of pollution risks, and provide data support for water environment management through real-time monitoring and analysis of various substances in water bodies.Modern water quality monitoring often em...
-
11-052025
TianYi® EL Detector [Model: FT-EL1] Partial Parameters
TianYi® EL Detector [Model: FT-EL1] Partial Parameters:Detectable Defect Types: Cracks, broken cells, fragments, broken grids, black core, poor soldering, process contamination, low-efficiency cells, black edge, over-firing, over-etching, perforations.Camera: 20-megapixel; Resolution: 4...
Hello, my friend！
What kind of support do you need? Our products is sure to satisfy you.
What kind of support do you need? Our products is sure to satisfy you.
Skype
whatsapp
mail